• Lenz’s Law is used to predict the?direction?of an induced e.m.f in a coil or wire
• Lenz's Law is summarised below:

The induced e.m.f is set up in a direction to produce effects that oppose the change causing it

Experimental Evidence for Lenz’s Law

• To verify Lenz’s Law, the only apparatus needed is:
  • A bar magnet
  • A coil of wire
  • A sensitive ammeter
• Note, a cell is?not?required

Lenz’s law can be verified using a coil connected in series with a sensitive ammeter and a bar magnet

• A known pole (either north or south) of a bar magnet is pushed into the coil
  • This induces an e.m.f in the coil
  • The induced e.m.f drives a current (because it is a complete circuit)
• Lenz's Law dictates:
  • The direction of the e.m.f, and hence the current, must be set up to?oppose?the incoming magnet
  • Since a?north pole?approaches the coil face, the e.m.f must be set up to create an induced?north pole
  • This is because two north poles will?repel?each other

• The direction of the current is therefore as shown in the image above
  • The direction of current can be verified using the right hand grip rule
  • Fingers curl around the coil in the direction of current and the thumb points along the direction of the flux lines, from north to south
  • Therefore, the current flows in an anti-clockwise direction in the image shown, in order to induce a north pole opposing the incoming magnet

• Reversing the magnet direction would give an opposite deflection on the voltmeter
  • Lenz's Law now predicts a south pole induced at the coil entrance
  • This would?attract?the north pole attempting to leave
  • Therefore, the induced e.m.f?always?produces effects to oppose the changes causing it

• Lenz's Law is a direct consequence of the?principle of conservation of energy
  • Electromagnetic effects will not create electrical energy out of nothing
  • In order to induce and sustain an e.m.f, for instance,?work?must be done in order to overcome the repulsive effect due to Lenz's Law