• This practical covers two key laboratory skills
  • use thin-layer or paper chromatography
  • safely and carefully handle solids and liquids, including corrosive, irritant, flammable and toxic substances

   

• A suitable experiment for this is the analysis of common analgesics by thin-layer chromatography

Key steps in the procedure

• An aspirin tablet is crushed using a mortar and pestle and 0.1 g of the powder is weighed out into suitable container such as a small test tube
• The powder is dissolved in 0.5 cm3?of ethanol
• Tablets of ibuprofen and paracetamol are prepared in the same way
• The procedure is repeated with a caffeine tablet and an Anadin Extra tablet, this time using 7 cm3?of ethanol to dissolve the crushed solid

Steps in the TLC analysis of some common analgesics

Running the TLC

• Prepare a beaker with a small quantity of ethyl ethanoate
• On a TLC plate, draw a fine horizontal line at the bottom edge (in pencil)
  • This is called the?baseline

   

• Draw five small crosses in pencil where the five spots will be located
• Use a capillary tube to draw up a small amount of the test solutions and transfer it to the crosses
  • Do not allow the spots to become too large as the quality of the separation will be affected

   

• Place the TLC plate inside a chromatography tank or beaker with solvent – making sure that the solvent does not cover the spot – and place a lid to cover the beaker
  • The solvent will begin to travel up the plate, dissolving the compounds as it does
  • A lid is need to prevent evaporation of the solvent (it also may be harmful)

   

• As solvent reaches the top, remove the plate and draw another pencil line where the solvent has reached, indicating the?solvent front
• The spots will be visible under a UV lamp, so allow the TLC plate to dry and use a pencil to draw around the spots under UV light
• The Rf?values of the spots can then be calculated